Germanium Concentrate Grade up to 1,500g/t in Bleiberg Mine
Released
Released
Announcement PDF
ASX Announcement
Released 17 April 2025
Breakthrough Germanium Grades up to
1,500 g/t Identified in Bleiberg Concentrates
Battery Age To Unlock Bleiberg’s Strategic Potential Amid
Tightening Chinese Export Restrictions of Critical Minerals
HIGHLIGHTS
•
Exceptional Germanium Grades Identified: Historical sampling records from the
Bleiberg mine returning germanium grades of up to 1,500 g/t, significantly exceeding
typical global production thresholds (100–300 g/t).
•
Direct-to-Refinery Potential: Concentrate grades are high enough to potentially
enable chemical refining without prior zinc smelting, offering substantial ESG and cost
advantages for European Refiners.
•
Widespread High-Grade Mineralisation: Multiple zones, including Erlach 14. Lauf,
Germaniumgugel and Carditascholle, delivered consistent zinc concentrate grades
>58% Zn with associated germanium from 500 to 1,500 g/t.
•
Strategic Relevance Amid Chinese Export Sanctions: With China sanctioning
germanium exports in 2024 to the USA, Bleiberg presents a truly unique EU-based
opportunity to secure long-term supply of this critical semiconductor material.
•
Pathway to Near-Term Development: Battery Age will now commence tailings
sampling and metallurgical testwork, alongside drill planning, with a continued focus on
engaging with potential strategic European downstream partners to accelerate
Bleiberg’s development as a secure source of critical minerals.
Battery Age Minerals Ltd (ASX: BM8; “Battery Age” or the “Company”) is pleased to
report the findings from an historic, government initiated study at the Bleiberg Zinc-LeadGermanium Mine in Carinthia, Austria, following the review of the previously unpublished
government-commissioned report. The report includes detailed sampling and laboratory
analysis of historical concentrates and ore material from the Bleiberg mine complex and
surrounding deposits.
Critically, it confirms the presence of exceptionally high germanium (Ge) grades of up to
1,500 g/t, representing material that is considered direct refinery-grade in today’s market.
This breakthrough enhances the strategic potential of the Company’s Bleiberg project at a time
when supply chain pressures around this critical mineral are intensifying globally.
This technical study, commissioned by the Austrian Ministry of Science and Research in 1991,
focused on identifying high-tech metals across the state of Carinthia. The study concentrated
on the Bleiberg-Kreuth mining district and involved multi-element analysis of different ore
types, samples from mining zones including Erlach 14. Lauf, Germaniumgugel, Carditascholle,
Torkergugel, and Kalkscholle (Table 1).
Battery Age Minerals Ltd
ASX: BM8
ACN 085 905 997
batteryageminerals.au
T: +61 (8) 6109 6689
E: info@batteryage.au
Level 50, 108 St Georges Terrace
Perth, WA 6000
PO Box 7310, Cloisters Square Po, WA 6850
1
Standout concentrate assay results include the below;
Samples Mr.:
B/5
B/34
B/36
B/37
B/14
B/15
B/16
B/17
B/59
B/10
B/6
B/9
Designation
ERLACH 14. LAUF
Breccienscholle
Breccienscholle
Breccienscholle
Breccienscholle
CARDITASCHOLLE
Baierstollen West
Johanni 1.Maxlf. 11m-Sch
86 m uber 6. Lauf
44 m uber 6. Lauf
11. Lauf Auffahrung
GERMANIUMGUGEL
2. Maxlauf
5. Lauf
Zwischen 5. u. 6. Lauf
Zn
%
Table 1: Assay highlight table
Ge
g/t
57.69
60.90
56.84
58.61
1500
1300
930
1500
61.80
62.44
58.23
62.62
59.70
850
450
480
500
500
57.50
59.30
61.40
900
900
1200
Across multiple zones, these values represent grades well in excess of modern economic
thresholds, where most zinc operations recover germanium up to 100–300 g/t levels in their
concentrates. Notably, the stratabound zinc-lead mineralisation is consistently enriched in
germanium, particularly within the brecciated carbonate horizons and associated vein
networks that were incompletely exploited during the mine’s final years of operation.
Many of these zones—particularly Erlach and Germaniumgugel—were producing high-grade
zinc concentrates in the 1980s and early 1990s, as demonstrated by the presence of 57–63%
Zn in many samples. However, germanium was not the primary economic driver at the time,
and processing routes were not optimised for its recovery. The Cerny report reveals that the
germanium concentrations were not only significant, but in multiple cases, could be high
enough to bypass conventional zinc smelting entirely.
Battery Age CEO, Nigel Broomham, commented:
“This is a genuinely exciting technical breakthrough. Concentrate samples grading 1,200 to
1,500 g/t germanium are exceptionally rare. These grades are potentially sufficient for direct
chemical refining by European refiners, which could allow the material to bypass conventional
zinc smelting. If confirmed, this would represent a meaningful advantage in terms of ESG
performance and project economics—particularly given current market conditions and
geopolitical dynamics.”
“We now have independent, historic lab data indicating that Bleiberg produced some of the
highest-grade germanium concentrates recorded during its final phase of operation—grades
that were not the focus at the time and which remain largely untapped today.”
ASX Announcement
Released 17 April 2025
2
Figure 4 Long-Section
X
X1
Figure 1: Bleiberg Project – Illustrating exploration tenure, historic mining corridor and shafts. Antoni Shaft
X474158.8; Y 5165543.6. Insert table demonstrates historical data for the Bleiberg Mine from previous workings.
Germanium occurs within the zinc mineral sphalerite (ZnS) and is a critical component of
modern technology, enabling semiconductors, optical fibres, infrared sensors, solar cells, and
military-grade photonics. In 2024, China formally sanctioned the export controls on germanium
and gallium, triggering a global supply shock and prompting strategic policy responses from
the European Union, United States, Japan, and Australia. In response, the EU added
germanium to its Critical Raw Materials Act, making domestic and allied supply of the element
a matter of urgent strategic priority.
Bleiberg’s location within the EU internal market—combined with existing rail and processing
infrastructure—makes it one of the most compelling undeveloped germanium opportunities
globally. Battery Age now controls over 140 km² of contiguous tenure across Bleiberg and 290
km2 at the recently staked Hochobir Project, positioning it as one of Europe’s largest holders
of germanium-prospective ground.
In addition to the pending maiden drilling permit at Bleiberg, Battery Age will now advance a
focused program of sampling and reanalysis of historic tailings, supported by modern
metallurgical test work. Early engagement with downstream European partners—including
specialty chemical refiners and technology materials groups— remains a key focus, with a
view to fast-tracking scoping-level assessments in collaboration with EU-aligned buyers.
“We believe Bleiberg is ideally placed to become a cornerstone asset for Europe’s critical
minerals future—particularly germanium. We are building the pathway for secure, ESGaligned, and scalable production from an asset with a proven track record, high grades, and
substantial growth potential.” Battery Age CEO, Nigel Broomham
ASX Announcement
Released 17 April 2025
3
Figure 2: Bleiberg Zinc Lead Germanium Project located in the state of Carinthia, Austria.
ASX Announcement
Released 17 April 2025
4
X
X1
Figure 3: Long section of Bleiberg mine developments and underground sample source locations. Antoni Shaft circled for reference X474158.8; Y 5165543.6. Sample
references are listed in tables with corresponding Ge, Ga, Cd and In grades.
ASX Announcement
Released 17 April 2025
5
B/5
B/22
B/34
B/35
B/36
B/37
B/14
B/15
B/16
B/17
B/18
B/19
B/54
B/20
B/21
B/59
B/10
B/6
B/9
B/7
B/8
B/53
B/50
B/51
B/52
B/55
B/62
B/23
B/24
B/25
B/32
B/26
B/33
B/27
B/28
ASX Announcement
Released 17 April 2025
Designation
ERLACH 14. LAUF
Breccienscholle
Cardita
Breccienscholle
Breccienscholle
Breccienscholle
Breccienscholle
CARDITASCHOLLE
Baierstollen West
Johanni 1.Maxlf. 11m-Sch
86 m uber 6. Lauf
44 m uber 6. Lauf
6. Lauf
7. Lauf
8. Lauf
10. Lauf
11. Lauf
11. Lauf Auffahrung
GERMANIUMGUGEL
2. Maxlauf
5. Lauf
Zwischen 5. u. 6. Lauf
6. Lauf
7. Lauf
TORKERGUGEL
8. Lauf West
KALKSCHOLLE
Bellegarde
82 m uber 6. Lauf
50 m uber 6. Lauf
6. Lauf
10. Lauf Forderstr. W
RIEDHARTSCHOLLE
5. Lauf
6. Lauf
7. Lauf
7 m uber 8. Lauf
15 m uber 8. Lauf
11. Lauf
Aufbruch uber Mitellauf
Mittellauf
JOSEFISCHOLLE
Zn
[%]
Ge
g/t
Ga
g/t
Cd
g/t
In
g/t
57.69
59.84
60.90
57.20
56.84
58.61
1500
92
1300
127
930
1500
6.2
94
25
35
25
15
477
2446
1187
1799
1040
487
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
61.80
62.44
58.23
62.62
57.72
59.71
60.50
60.95
56.59
59.70
850
450
480
500
137
188
67
165
249
500
1.1
1.2
1.3
2.3
4.5
24
137
33
24
7.9
669
1052
990
1052
1507
1250
3416
2443
1295
1001
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.03
57.50
59.30
61.40
62.60
59.33
900
900
1200
53
209
36
68
7
52
123
1267
1471
450
3300
2890
<0.1
<0.1
<0.1
<0.1
<0.1
63.70
270
16
1930
<0.1
63.00
62.70
62.30
60.50
59.50
78
690
140
79
130
3
6.4
1.5
19
90
2764
1156
1992
3158
2610
<0.1
<0.1
<0.1
<0.1
<0.03
59.30
61.30
61.80
58.98
59.05
60.72
61.22
61.83
40
41
60
157
120
128
167
104
24
56
36
57
7.9
35
21
6.7
2455
3350
2119
1962
2195
2386
2414
1588
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
6
B/60
B/29
B/30
B/31
B/56B
B/1
B/61
B/2
B/3
B/4
B/41
B/40
B/39
B/38
B/11
B/12
B/13
B/57
B/58
B/42
B/43
B/44
B/45
B/46
B/47
B/48
B/49
5. Lauf
6. Lauf
12 m uber 8. Lauf
8. Lauf Ost
92 m uber 10. Lauf
10. Lauf
TIEFBAUSCHOLLE
Tiefbauscholle
ALLERHEILIGEN
5. scheibe uber 2. Lauf
4. Lauf
5. Lauf
KALKGRUBE
7. Lauf (Carditadolomit)
6. Lauf
7. Lauf
8. Lauf
VORSICHT
5. Lauf
6. Lauf
7. Lauf
SONSTIGE BLEIBERG
Schneidergr.Christofiverh
Bleiberg E. Sonns. Halde
STEFANIE Wettersteinkalk
13. Lauf WI
13. Lauf WII
13. Lauf Osten
13. Lauf Konradi
13. Lauf 100m Vererzung
13. Lauf Eismanner
13. Lauf Rismannerk luft
13. Run Johanni
60.70
58.30
57.66
60.35
62.60
61.24
160
236
147
800
190
78
34
4.4
17
56
<0.5
17
1644
1097
1550
1796
1780
2635
< 0.03
<0.1
<0.1
<0.1
<0.1
<0.1
55.50
700
20
1155
<0.03
61.34
61.36
59.27
320
220
880
12
16
21
1242
1711
727
<0.1
<0.1
<0.1
63.10
629.00
64.50
60.00
100
350
205
102
60
11
19
11
3260
1778
990
1826
<0.1
<0.1
<0.1
<0.1
59.60
53.74
61.81
100
225
86
11
18
4.2
1967
1350
1653
<0.1
<0.1
<0.1
58.90
61.70
530
350
70
9
1340
1611
<0.3
<0.3
61.10
62.7
61.30
62.70
62.60
64.1
63.50
62.70
300
115
30
75
180
160
120
56
23
14
11
4.6
7.1
6.4
11
14
1530
1122
3392
3254
2230
2408
2616
3160
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
Table 2: Tabulation of all reported samples and sample locations from Bleiberg with assay values for
Zn/Ge/Ga/Cd/In
References:
1. Zeeh,S. and Bechstadt,T. (1994). Carbonate-Hosted Pb-Zn Mineralisation at Bleiberg-Kreuth (Austria):
Compilation of Data and New Aspects. In: Fontbote,L. and Boni,M. editors, Sediment Hosted Pb-Zn
Ores, Special Publication No. 10 of the Society for Geology Applied to Mineral Deposits. pp. 271-2962.
Cerny,I. (1991). Lagerstättenforschung in Kärnten Neuergebnisse und Aspekte für die Zukunft.
Carinthiall 181./101. Jahrgang S. 119-129 Klagenfurt 1991.
Cerny,I. and Schroll,E. (1995). Spezialmetallgehalte in ZnS-Konzentraten der Lagerstätte BleibergKreuth. Arch. f. Lagerst.forsch. Geol. B.-A. ISSN 0253-097X Band 18 S. 5–33 Wien, Juni 1995.
Schroll,e. (2006). Neues zur Genese der Blei-Zink Lagerstätte Bleiberg. Carinthia II 196./116. Jahrgang
Seiten 483-500 Klagenfurt 2006.
ASX Announcement
Released 17 April 2025
7
Multi-Met (2023) Bleiberg Project - Multi-Met, Multi. Available at:
https://multimetdev.com/projects/bleiberg-project/.
Schor, D. (2021) TSMC details 5 nm, WikiChip Fuse. Available at:
https://fuse.wikichip.org/news/3398/tsmc-details-5-nm/ (Accessed: 25 February 2024).
Leach. D, Taylor. R, Fey. D et al.(2010), , A deposit model for Mississippi Valley-Type lead-zinc ores,
USGS Scientific Investigations Report 2010-5070-A.
Mining Insights Pty Ltd, Independent Geologists Report, 1 December 2022.
2. Refer to Bleiberg earn-in terms and structure set out in the Company’s announcement dated 16 May
2024 and Prospectus dated 7 December 2022.
[ENDS]
Release authorised by the Board of Battery Age Minerals Ltd.
Contacts
Investors / Shareholders
Nigel Broomham
Chief Executive Officer
P: +61 (0)8 6109 6689
E: info@batteryage.au
ASX Announcement
Released 17 April 2025
Media
Kelly-Jo Fry
Battery Age Minerals
P: +61 (0)8 6109 6689
E: kjfry@batteryage.au
8
Competent Person Statement
The Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (the ‘JORC
Code’) sets out minimum standards, recommendations and guidelines for Public Reporting in Australasia of
Exploration Results, Mineral Resources and Ore Reserves.
The information in this release that relates to Exploration Results is based on information prepared by Dr Simon
Dorling. Dr Dorling is a member of the Australasian Institute of Geoscientists (Member Number: 3101) and a
consultant of Battery Age. Dr Dorling has sufficient experience which is relevant to the style of mineralisation and
type of deposit under consideration and to the activity which they are undertaking to qualify as a Competent Person
as defined in the 2012 Edition of the JORC Code (Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves). Dr Dorling consents to the inclusion in the release of the matters based on their
information in the form and context in which it appears.
Compliance Statement
This report contains information on the Bleiberg Project extracted from an ASX market announcement dated 8
December 2022, 2 February 2023, 13 July 2023, 26 February 2024, 26 March 2024, 16 May 2024 and 22 January
2025 released by the Company and reported in accordance with the 2012 edition of the “Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC Code). The original market
announcement is available to view on www.batteryage.au and www.asx.com.au. Battery Age is not aware of any
new information or data that materially affects the information included in the original market announcement.
Forward-Looking Statement
This announcement may contain certain forward-looking statements and projections. Such forward looking
statements/projections are estimates for discussion purposes only and should not be relied upon. Forward looking
statements/projections are inherently uncertain and may therefore differ materially from results ultimately achieved.
Battery Age Minerals Limited does not make any representations and provides no warranties concerning the
accuracy of the projections and disclaims any obligation to update or revise any forward-looking statements/projects
based on new information, future events or otherwise except to the extent required by applicable laws. While the
information contained in this report has been prepared in good faith, neither Battery Age Minerals Limited or any of
its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as to
the fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this
announcement.
Appendix 1 – JORC CODE, 2012 EDITION – TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
JORC Code explanation
•
Nature and quality of sampling
(eg cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals
under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc).
These examples should not be
taken as limiting the broad
meaning of sampling.
•
Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used.
ASX Announcement
Released 17 April 2025
Commentary
• The assay results referenced in this
release are based on 62 samples
collected from the Bleiberg underground
mine area as part of a governmentcommissioned geochemical investigation
(Cerny, 1991).
• Samples were described as
representative face samples and were
taken from exposed ore and stockpiles
from historic underground workings.
• Each sample weighed between 10 and
30 kg and was processed into
concentrate prior to analysis.
• Sample concentrates were produced by
crushing and grinding the sample and
lab-scale floatation.
• The sampling aimed to characterise the
specialty metal content (e.g. Ge, Ga, Cd)
9
Criteria
Drilling
techniques
Drill
sample
recovery
Logging
JORC Code explanation
•
Aspects of the determination of
mineralisation that are Material
to the Public Report.
•
In cases where ‘industry
standard’ work has been done
this would be relatively simple
(eg ‘reverse circulation drilling
was used to obtain 1 m samples
from which 3 kg was pulverised
to produce a 30 g charge for fire
assay’). In other cases more
explanation may be required,
such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities
or mineralisation types (eg
submarine nodules) may
warrant disclosure of detailed
information.
•
Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard
tube, depth of diamond tails,
face-sampling bit or other type,
whether core is oriented and if
so, by what method, etc).
•
Method of recording and
assessing core and chip sample
recoveries and results
assessed.
•
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
•
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
•
Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
•
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
ASX Announcement
Released 17 April 2025
Commentary
in residual and mined ore zones across
the Bleiberg-Kreuth system.
• No industry specific tools have been
recorded to have been used
•
No drilling has been referenced or
reported
•
No drilling has been referenced or
reported
•
No drilling has been referenced or
reported
The material sampled consisted of ore
samples from exposed underground
workings and stockpiles.
Sampling locations included active
mining faces, drives and stopes where
mineralisation is typically breccia-hosted
or stratabound mineralisation in
carbonate rocks.
•
•
10
Criteria
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of
sampling
and
assaying
JORC Code explanation
•
The total length and percentage
of the relevant intersections
logged.
•
If core, whether cut or sawn and
whether quarter, half or all core
taken.
•
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
•
For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
•
Quality control procedures
adopted for all sub-sampling
stages to maximise
representivity of samples.
•
Measures taken to ensure that
the sampling is representative
of the in situ material collected,
including for instance results for
field duplicate/second-half
sampling.
•
Whether sample sizes are
appropriate to the grain size of
the material being sampled.
•
The nature, quality and
appropriateness of the assaying
and laboratory procedures used
and whether the technique is
considered partial or total.
•
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times,
calibrations factors applied and
their derivation, etc.
•
Nature of quality control
procedures adopted (eg
standards, blanks, duplicates,
external laboratory checks) and
whether acceptable levels of
accuracy (ie lack of bias) and
precision have been
established.
•
The verification of significant
intersections by either
independent or alternative
company personnel.
•
The use of twinned holes.
ASX Announcement
Released 17 April 2025
Commentary
•
•
•
•
•
•
•
•
•
The assay results referenced in this
release are based on 62 samples
collected from the Bleiberg mine area as
part of a government-commissioned
geochemical investigation (Cerny, 1991).
Samples were described as
representative and were taken from
exposed ore outcrops and stockpiles
from historic underground workings.
Each sample weighed between 10 and
30 kg and was processed into
concentrate prior to analysis.
The sampling aimed to characterise the
specialty metal content (e.g. Ge, Ga, Cd)
in residual and mined ore zones across
the Bleiberg-Kreuth system.
Sample concentrates were produced by
crushing and grinding the sample and
lab-scale floatation.
Samples were analysed for Zn, Pb, Ge,
Ga, Cd, In, Tl, Se, Te, Fe, Sb, Mn, Sn, V,
Ag, As, Bi, Co, Mo, Ni, Ca, Mg and S
(Cerny and Schroll, 1995).
Laboratory techniques included AAS,
ICP-OES, WD-XRF and ED-XRF,
considered appropriate for the time.
No QC/QA protocols are documented in
the historical reports.
No formal verification or independent
duplicate analysis is recorded. Assay
values are reported as laboratorycertified results in academic studies.
11
Criteria
Location of
data points
Data
spacing
and
distribution
JORC Code explanation
•
Documentation of primary data,
data entry procedures, data
verification, data storage
(physical and electronic)
protocols.
•
Discuss any adjustment to
assay data.
•
Accuracy and quality of surveys
used to locate drill holes (collar
and down-hole surveys),
trenches, mine workings and
other locations used in Mineral
Resource estimation.
•
Specification of the grid system
used.
•
Quality and adequacy of
topographic control.
•
•
•
Orientation
of data in
relation to
geological
structure
•
•
Sample
security
•
Audits or
reviews
•
ASX Announcement
Released 17 April 2025
Data spacing for reporting of
Exploration Results.
Whether the data spacing and
distribution is sufficient to
establish the degree of
geological and grade continuity
appropriate for the Mineral
Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
Whether sample compositing
has been applied.
Whether the orientation of
sampling achieves unbiased
sampling of possible structures
and the extent to which this is
known, considering the deposit
type.
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and
reported if material.
The measures taken to ensure
sample security.
The results of any audits or
reviews of sampling techniques
and data.
Commentary
•
•
•
•
•
•
•
•
•
•
•
The sample locations are reported to
have been taken from known
underground workings and mineralised
headings within named zones of the
Bleiberg and Kreuth mines.
Precise coordinates were not published.
Austrian national grid and mine-level
plans were used.
The central shaft of the operation,
“Antoni Shaft” is located as below
MGI / Austria M31 EPSG: 31285
X
Y
474158.8
5165543.6
The data spacing reflects selective
sampling of ore blocks and mineralised
zones, not systematic grid spacing.
Data is not sufficient for resource
estimation but indicates grade trends and
enrichment.
No compositing was applied.
No drilling has been referenced or
reported
Orientation relative to structure is
unknown; however, samples were
collected from underground development
levels, assumed to follow mineralised
strata.
No information on sample custody or
chain of custody procedures has been
documented.
No external audit has been undertaken.
Data is derived from published scientific
literature and Austrian geoscientific
sources.
12
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
• Type, reference name/number,
location and ownership including
agreements or material issues
with third parties such as joint
ventures, partnerships, overriding
royalties, native title interests,
historical sites, wilderness or
national park and environmental
settings.
• The security of the tenure held at
the time of reporting along with
any known impediments to
obtaining a licence to operate in
the area.
Commentary
•
•
•
•
Exploration
done by other
parties
•
ASX Announcement
Released 17 April 2025
Acknowledgment and appraisal of
exploration by other parties.
•
•
The Bleiberg project is located
appro. 130km south of the city of
Saizburg in southern Austrian within
the eastern Alps region of Europe.
The Bleiberg Earn-in JV project
consists of 116 claims (EL 476/22
(BB1) – 591/22 (BB116)) held in the
name of the Company. The
Company currently has a 51%
interest in the JV. The Company
may acquire a further 14% interest
(total 65%) within 36 months of
acquiring the abovementioned 51%
interest by incurring an additional
C$3,500,000 in expenditure on the
project (ie before May 2027). The
Company may acquire the final 15%
interest (total 80%) in the above
Bleiberg JV within 6.5 years upon
completion of a Bankable Feasibility
Study that is compliance to JORC
and indicates the project will have a
production rate of at least 100,000
tonnes per year (ie before Nov
2030). JV Partner retains clawback
earn-back rights for 36% should the
company not complete the 65%
earn in rights. A portion of the claims
have third-party mining claims
(figure 2). The details of the joint
venture were reported to the ASX on
8 December 2022 and 16 May
2024.
The Bleiberg West project consists
of 60 claims which the Company
has 100% interest (1524/23 (BW1)–
1583/23 (BW60)) held by the
Company.
The Bleiberg 2025 Extension project
consists of 130 claims which the
Company has 100% interest
(1413/24 (BE1)– 1542/24 (BE130))
held by the Company.
No known impediments.
The data presented is derived from
the work of Dr. I. Cerny and Prof. E.
Schroll, commissioned by the
Austrian government. Additional
references include peer-reviewed
publications and archived technical
reports related to the Bleiberg and
Kreuth mining operations.
13
Criteria
Geology
JORC Code explanation
• Deposit type, geological setting
and style of mineralisation.
Drill hole
Information
•
•
Data
aggregation
methods
•
•
ASX Announcement
Released 17 April 2025
A summary of all information
material to the understanding of
the exploration results including a
tabulation of the following
information for all Material drill
holes:
o easting and northing of the
drill hole collar
o elevation or RL (Reduced Level
– elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and
interception depth
o hole length.
If the exclusion of this information
is justified on the basis that the
information is not Material and
this exclusion does not detract
from the understanding of the
report, the Competent Person
should clearly explain why this is
the case.
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (eg cutting of high
grades) and cut-off grades are
usually Material and should be
stated.
Where aggregate intercepts
incorporate short lengths of high
grade results and longer lengths
of low grade results, the
procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in
detail.
Commentary
•
•
•
The Bleiberg deposit is classified as
a stratabound carbonate-hosted PbZn deposit, with enrichment in
specialty metals including
germanium, gallium, and cadmium.
Mineralisation occurs within Triassic
carbonate units in the Northern
Karawanken Alps, Austria.
No drilling has been referenced or
reported
No aggregation or metal equivalents
have been applied. All germanium
grades are reported as individual
sample assays.
14
Criteria
JORC Code explanation
Commentary
• The assumptions used for any
reporting of metal equivalent
values should be clearly stated.
• No drilling has been referenced or
Relationship
• These relationships are
reported in the historical sampling
between
particularly important in the
program.
mineralisation
reporting of Exploration Results.
widths and
• If the geometry of the
intercept
mineralisation with respect to the
lengths
drill hole angle is known, its
nature should be reported.
• If it is not known and only the
down hole lengths are reported,
there should be a clear statement
to this effect (eg ‘down hole
length, true width not known’).
• Regional and project plan view
Diagrams
• Appropriate maps and sections
maps of the Bleiberg project can be
(with scales) and tabulations of
found in the body of this release.
intercepts should be included for
• X-Section of the Bleiberg mine and
any significant discovery being
sample locations can be found in
the body of this release
reported These should include, but
not be limited to a plan view of
drill hole collar locations and
appropriate sectional views.
• All relevant Bleiberg sample data
Balanced
• Where comprehensive reporting
cited from the Cerny report has
reporting
of all Exploration Results is not
been disclosed.
practicable, representative
reporting of both low and high
grades and/or widths should be
practiced to avoid misleading
reporting of Exploration Results.
• The 1991 report includes multiOther
• Other exploration data, if
element geochemical assays for
substantive
meaningful and material, should
over 250 samples but does not
exploration
be reported including (but not
include density or environmental
data
limit
Share your feedback
Discover